industrija новости

  • Thе allure оf steel roofing systеmѕ is the longevity аnd thеіr durаbіlitу

    We’re getting ultimately more and much mоre demands metal options. Thе allure оf steel roofing systеmѕ is the longevity аnd thеіr durаbіlitу. Proponentѕ state metal rооfѕ have ecological benefits, can leѕѕen heatіng and cooling expenses аnd might reduce the home owner’s іnѕurаncе rate...
    Опширније
  • Why copper is by far the most superior metal roof?

    So far, copper is the most superior (and most expensive) metal roof material because it will not rust. If installed correctly, some copper roofs can last for 100 years or more. There is also the recycling/scrap value of the copper roof. In fact, recycling copper roofs can provide a considerable r...
    Опширније
  • Can I use a metal roof as a roof?

    First, make sure your roof is a gable, arch, hip and ridge, flat roof, etc. The second is the slope or slope of the roof. For some roofs, the slope will be different. For flat roofs, rubber roofs are the only option if you want to maintain water tightness. If your roof slope is less than 3/12 of ...
    Опширније
  • Which is the best choice-metal roof or asphalt shingle roof?

    There are a few things to consider here. There are various roofing materials on the market. It is important to first determine your goals? If you just want to know the service life or “lifetime” of a strip house and metal (and assuming there is no difference in the watertight integrit...
    Опширније
  • Will Metal Roof Ever Rule the World?

    The steel roof is durable. The service life of a steel roof can exceed 50 years, while a traditional roof can merely use an average of 17 years. The durability of steel means less trouble and lower cost during its life. Under the influence of humidity, sunlight or other weather, the steel roof wi...
    Опширније
  • The portable roll forming machine series brings metal roof manufacturing to the job site

    The portable roll forming machine series brings metal roof manufacturing to the job site

    The portable roll forming machine series brings metal roof manufacturing to the job site. They are professionals’ choice when it comes to seamless solutions and support. On-site manufacturing eliminates transportation damage, short transportation time and many dimensional errors, and saves ...
    Опширније
  • How to maintain light steel keel machine

    How to maintain light steel keel machine

    For the maintenance of light steel keel machine, the most important thing is not to overload work during use, and must strictly follow the instructions in the manual. Check the operation of each part before work to avoid malfunction. During the operation of the light steel keel machine, it is als...
    Опширније
  • Brief introduction of keel machine raw materials and processing technology

    Brief introduction of keel machine raw materials and processing technology

    The raw material of the keel machine is steel, and a series of keel products are produced by processing it. Keel products play an increasingly important role in modern architecture and are an indispensable device in architectural processing. The processing technology of the keel machine unit is a...
    Опширније
  • Introduction of Cold Forming Technology

    Introduction of Cold Forming Technology

    ​Cold forming is a new process and new technology of sheet metal forming that saves material and energy. Cold roll forming equipment Cold roll forming (Cold Roll Forming) is the continuous horizontal bending of coils, strips and other metal plates through sequential multi-pass forming rolls to ma...
    Опширније
  • Advantages and material selection of steel gutter

    In large-scale factories, steel gutters use a large part of steel, but steel gutters also have their own advantages. The wind load in coastal areas is generally relatively large. If the color plate gutter is used, under the action of strong wind load, the color plate gutter is weak and easy to be...
    Опширније
  • How can the metal roof machine be used for a long time?

    First, clean the surface of the metal roof machine; It is strictly forbidden to work beyond the minimum closing height, that is, the minimum distance between the bottom surface of the upper sliding box and the working surfaces is 290 mm. The height after the upper and lower molds is required plus...
    Опширније
  • Longevity-the advantages of metal roofs

    The life of a properly installed metal roof depends on the materials used and is about 40-70 years. For example, aluminum has the longest life because it is not subject to corrosion. However, on the other hand, traditional asphalt roofing can be used for about 12-20 years. We, Tianjin Haixing is ...
    Опширније
ВхатсАпп Мессенгер Удји на цхат!