How to debug color steel roof roll forming machine

1. First, align the four corners of the front and back lines of the colored steel equipment from the upper end of the large frame to the bottom shaft, and then from the row to the back row, find a straight line and check whether the lower shaft is on a straight line. Up, horizontally adjust the left and right sides of the lower shaft.

2. Locate the row and rear row of the colored steel equipment, and then tighten the lock nuts on both sides, pull a straight line in front of and behind the middle wheel, adjust the gap between the upper and lower shafts, and then adjust along the straight line.

3. The debugging method of the deviation of the pressure plate of the color steel roof roll forming machine, for example, the pressure plate runs to the right, the pad is at the bottom of the left corner (paper feed frame) or falls at the bottom of the right corner (axis number), and the upper axis falls with the bottom axis )


Post time: May-12-2020
WhatsApp Online Chat !