|
Trapezoidal mpempe akwụkwọ Roll akpụ Machine parameters |
||
| 1 | Main moto ike | 4kW, 3-adọ ma ọ bụ ka gị na-arịọ |
| 2 | Hydraulic moto ike | 3kW |
| 3 | Hydraulic mgbali | 10-12MPa |
| 4 | voltaji | 380V / 3-adọ / 50Hz (ma ọ bụ dị ka gị chọrọ) |
| 5 | Control usoro | PLC Delta inverter |
| 6 | Mainframe | 300 / 350mm H-doo ma ọ bụ 350mm |
| 7 | Backboard ọkpụrụkpụ | 16mm |
| 8 | Chain size | 1 Inch |
| 9 | nri ihe | agba ígwè coils |
| 10 | nri ọkpụrụkpụ | 0.3-0.8mm |
| 11 | nri obosara | 1000mm |
| 12 | irè obosara | 850mm |
| 13 | Productivity | 0-15 / min |
| 14 | Roll ojii | 13 mpịakọta nzọụkwụ (dị ka dị iche iche imewe) |
| 15 | ala n'obosara | 70mm (na-adabere na dị iche iche imewe) |
| 16 | ala ihe | 45 # ígwè |
| 17 | cutter ihe | Cr12 |
| 18 | ČR-plating size | 0.05mm |
| 19 | n'ozuzu size | 6800 * 1400 * 1150mm |
| 20 | Total ibu | 4.8 tọn |
Ngwa nke metal n'elu ụlọ Ibé akwụkwọ maka ụlọ na Villas:
Ọ nwere ike na-emepụta ọtụtụ ígwè elu ụlọ na mgbidi panel, ndị na ngwaahịa na-n'ọtụtụ ebe dị ka elu ụlọ na mgbidi factory, nkwakọba, ụgbọala, emega ahụ, ngosi center, sinima, ihe nkiri, wdg
Ihe nke igwe:
Packaging Nkọwa :
1. Machine na-kpuchie site plastic film.
2. PLC akara igbe, akụkụ ahụ mapụtara na ndị ọzọ na obere akụkụ na-juru n'ọnụ site osisi katọn igbe.
