|
Mabati Curving Roof Machine vigezo |
||
| 1 | Kuu motor nguvu | 5.5kw, 3 awamu au kama ombi lako |
| 2 | Hydraulic motor nguvu | 4KW |
| 3 | hydraulic Shinikizo | 10-12MPa |
| 4 | voltage | 380V / 3phase / 50 Hz (au kama mahitaji yako) |
| 5 | Control System | PLC Delta Inverter |
| 6 | kuu Frame | 300mm / 350mm H-Beam au 350mm |
| 7 | backboard Unene | 16mm |
| 8 | Chain Ukubwa | 1 Inch |
| 9 | kulisha Material | coils rangi chuma |
| 10 | kulisha Unene | 0.3-0.8mm |
| 11 | kulisha upana | 100-1200mm |
| 12 | ufanisi upana | 840-1050mm |
| 13 | uzalishaji | 0-15 / min |
| 14 | roll Station | 13 roll hatua (kulingana na design tofauti) |
| 15 | Roller Kipenyo | 70mm (hutegemea kubuni tofauti) |
| 16 | Roller nyenzo | 45 # chuma |
| 17 | nyenzo cutter | Cr12 |
| 18 | Cr-Plating Size | 0.05mm |
| 19 | Kwa ujumla Size | 6800 * 1400 * 1150mm |
| 20 | Uzito wote | 5.8T |
faida ya mabati paa mashine curving:
1. mashine yetu inaweza inatumia chuma karatasi, rangi silaha sahani au sahani alumini kama sahani nyenzo.
2. Kudhibiti na kompyuta, PLC kuonyesha, operesheni rahisi, mbio ni thabiti na ya kuaminika, endurable, matengenezo ya bure.
3. Tunaweza kufanya na miundo itakuwa aina ya roll kutengeneza mashine kulingana na ombi mteja.
Machine picha:
